Find Flame Treatment Machine, Flame Heating Machine, Flame Processor on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Flame Treatment Machine > High Speed Flame Treatment Machine on Flat Cylindrical Objects

High Speed Flame Treatment Machine on Flat Cylindrical Objects

Basic Info

Model No.:  TM-F3

Product Description

Model NO.: TM-F3 Height of Work Piece: 25-250 Mm Conveyer Size: 230mm Conveyer Transfer Speed: 0-10m/Min Machine Dimension: 2200X1200X700 Mm (Lxwxh) Trademark: Tamprinter Specification: CE HS Code: 8443198000 Flame Area: 25~250mm Bottle Mouth Diameter: 12-24mm Output: 1800~3000PCS/Hr Compress Air: 6 Bar Machine Weight: 155 Kg Transport Package: Plywood Case/Wooden Case/Carton/as Required Origin: Guangdong, China TM-F3 High Speed Flame Treatment Machine on Flat / Cylindrical ObjectsHow to work video: http://v.youku.com/v_show/id_XNTE1NDE2MDQw.html 


Specifications: 
 
Flame area 25~250mm
Height of work piece 25-250 mm
Bottle mouth diameter 12-24mm
Conveyer size 230mm
Output 1800~3000PCS/Hr
Conveyer transfer speed 0-10m/min
Compress air 6 bar
Fuels for Flame Processor Liquefied petroleum gas
Power supply AC 380V/ 50Hz, 3-Phase
Machine dimension 2200X1200X700 mm (LXWXH)
Machine weight 155 KG 


Quick Details: 

Plate Type: Screen Printer

Condition: New

Place of Origin: Guangdong China (Mainland)

Brand Name: TM

Model Number: F3

Usage: PP, PE, PET bottle pretreatment

Automatic Grade: Semi-Automatic

Color & Page: Single Color

Gross Power: 50W

Dimensions(L*W*H): 2300X1200X700mm

Color: Green

Accessery: Toolbox, manual

Useful: Flame treatment before printing

Type: Flame Treatment Machine


Packaging & Delivery

Packaging Detail: Plywood case

Delivery Detail: 1-2weeks 
Operational issues:

1. This machine uses 220V power supply, and combustible gases, and compressed by the compressor air ventilation when using the machine and away from danger highly flammable areas where conditions permit the best equipped with fire fighting equipment!   2. The machine has a certain degree of risk, please pay attention to safety when using operator and the operator has certain associated processing consciousness! 

Boot steps:   1. Plug 220V power supply, and pass on the combustible gas and compressed air, the air pressure is about 3-4KG around! Followed by seeing, hearing, smell and other methods to check whether there is leakage of the place, check Do not use open flame check, to avoid danger, you can use soapy water to check for leaks! Checked and then wipe to dry!   2. Open the emergency stop switch power to start the governor, confirmed a few weeks to let the whole operation and commissioning of the sharp turn running OK, and then press the combustible gas switch, and then try to turn on the combustible gas flame gun switch, ( just started not too wide ) then the ignition, allowing the flames to ignite, and then slowly open the air switch, and gas -switch synchronous adjustment, adjusted to the blue flames
On behalf of the flame has been adjusted, press workpiece speed and running speed, try to adjust the position of both sides of the flame, the flame come into contact with the surface, quickly through!   3. Tables under a pressure regulator, a pressure regulator only on behalf of the combustible gas meter, and the other is an air pressure adjustment table, generally regulated at 3-4KG so on it!   4. Configure the emergency stop switch, under any circumstances, press the emergency stop switch, the machine will stop, but the machine is stopped, the combustible gas will shut down, but for safety reasons, turn off the gas main switch should be relatively synchronized properly!   5. When the work is shut down, turn off the combustible gas switch, first extinguish the flame, the flame gun surface is heat, please do not touch, so as not to burn, you can allow free air circulation for some time and then turn off the air! In order to achieve the cooling effect! From work and want to turn off the power switch, and combustible gas master switch for safety!  
The 2 spark flame treatment machine is use for pre-treatment PP and PE bottle surface before printing.    
High Speed Flame Treatment Machine on Flat Cylindrical ObjectsHigh Speed Flame Treatment Machine on Flat Cylindrical Objects
 
High Speed Flame Treatment Machine on Flat Cylindrical Objects

Contact us if you need more details on Flame Treatment Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Cylindrical Flame Treatment Machine、Bottle Flame Treatment Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Flame Treatment Machine