Find Drying Cabinet For Screen, Drying Cabinet For Screen Printing, Plastic Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Pre-Post Equipment > Electric Oven > Tdp-70100 Drying Cabinet for Screens When Coated with Emulsion

Tdp-70100 Drying Cabinet for Screens When Coated with Emulsion

Basic Info

Model No.:  TDP-70100

Product Description

Model NO.: TDP-70100

Operational Method: Intermittent

Drying Medium: Air

Heating Mode: Transmission

Type of Flow: Contra-Flow

Sprayer: Air-Flowing Type

Certificate: Ce

Transport Package: Plywood Case/Wooden Case/as Required

Origin: China(Mainland)

Structure: Air Flow Drier

Operation Pressure: Atmospheric Dryer

Appearance of Dried Sample: Bulk

Movement Way: Combined

Type of Atomization: Gas Atomization

Condition: New

Trademark: Tamprinter

Specification: 1500*1200*1100

HS Code: 8442309000

TDP-70100 drying cabinet for screens when coated with emulsion

Stencil dryer Fit for TMP-70100 Screen Printer


MOLDE TDP-70100 TDP-6090 TDP-90120 TDP-12140
MAX PLATE SIZE(mm) 900*1200 800*1000 1100*1400 1400*1600
power(v/hz) 380/50 or 20/50 380/50 or 220/50 380/50 or 20/50 380/50 or 20/50
power(kw) 4*1kw 4*1kw 5*1kw 6*1kw
Heating pipe stainless steel stainless steel stainless steel stainless steel
Temperature 0~200deg 0~200deg 0~200deg 0~200deg
Timer 0.5~2 H 0.5~2 H 0.5~2 H 0.5~2 H
machine size 1500*1200*1100 1400*1100*1100 1400*1700*1100 1700*1900*1100
weight 150kg 100kg 200kg 250kg
plywood about 3.1 CBM about 2 CBM about 4 CBM about 4.2 CBM

Applicable Scope and advantage

Screen printing drying cabinet is applied to drying the screen plate.

This drying cabinet inside installed axial flow fan makes the hot air in circulation, which guarantees an equal temp in cabinet and can improve drying efficiency meanwhile The axial flow fan can normally be used for about 20,000 hours. It usually takes 2~4 minutes to well dry the screens coated with the photosensitive emulsion


1,Hot air circulation system ensure constant temperature,save energy, compared with traditional 7000~8000W drying cabinet, this equipment can save power 3%~4% .

2,CNC control system ,make the operation easily.

3,The specification could be made as customers requirement


1, turn on the power switch, indicator light.

2, adjust the required temperature.

3, the workpiece flat on the grid in the box, and then open the electric switch to meet the requirements, remove the product.

4, after drying the product, should cut off the power.


1, according to the screen version of the temperature, the oven version of the maximum temperature can only reach 70 degrees to 100 degrees under normal circumstances, set the temperature of 65 degrees is appropriate.

2, the actual operation, due to room temperature and switch drawer and other factors, the instrument set the temperature and the actual instrument temperature may be 2-3 degrees difference, is a normal phenomenon, does not affect the machine.

3, the instrument used in a variety of machines in the power off and then re-use, the machine is still restored to the last time before the closure of the set

4, the reference data: the set temperature of 65C, the use of photosensitive paste single layer drying time For about 2 minutes, drying is not linked to the pulp slurry version of the time for about 1 minute.

Maintenance instructions:

1, the machine installation should be smooth, without shaking.

2, pumping out the grid should be flat pumping, and keep the grid clean.

Contact us if you need more details on Drying Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Drying Machinery、Drying Oven. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Pre-Post Equipment > Electric Oven

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters