Tam-M-1 Transparent Crystal Pad Mould

Model NO.: TAM-M-1 Surface Finish Process: Polishing Process Combination Type: Single-Process Mode Certification: CE Item: Crystal Pad Mould Usuage: Pad Mould Making Brand: Tamprinter Trademark: Tamprinter Origin: China Shaping Mode: Crystal Pad Mould Mould Cavity: Single Cavity Application: Pad Printing Machine Customized: Customized Size: Customize Original: China MOQ: 10PCS Specification: CE HS Code: 8443198000 TAM-M-1 Transparent Crystal Pad Mould


Also called  silicon pad mould and crystal mould, rubber pad mold. Professional OEM processing, cash transactions.
Please tell us the size, quantity, hardness and send picture as well before you place an order. 
 
Pad printing means transferred the pattern to the toy steel products through the silicon pad.
Silicone printing quality requirements fine, no impurities, good resilience, oil well, a clear pattern printing.



The use of silicon pad:
 
Mainly for the printing of plastic toys, electroplating products, electronic toys, trademarks and irregular pattern. Pad printing is done on the pattern plate carrier through the rubber head, then the pattern is transferred to the toy steel products.



Pad Silicone Product Instructions:
 
First, put a clean mold cleaning with detergent, then dry the mold in water or with an air gun to dry, and apply a release agent.
Second, silicone pad, the normal ratio of silicone oil, based on customer requirements and given, if a customer requires a large area of the printed pattern, required soft head, the more increase in silicone oil. Instead, you need to glue head hardness of not less silicone oil added, the hardness general printing of plastic to 15A ~ 25A ° is suitable, if the silicone oil added is too large, too soft plastic head, showed a limited number of print even the best silicone quality will be undermined its molecular weight silicone oil, and produce no wear, no solvent and aging.
Third, introduce the normal ratio is as follows: 100 g of silica gel was added 30 grams of silicone oil, plastic head hardness 15A °, adapt printing pattern alloy car Aberdeen and small contact area is relatively small products. As required pressure contact surface or need soft head, the proportion of silica and silicone oil can be 100: 30,100: 50 range, but note that the larger the amount of silicone oil added, the softer the rubber head, the number of printing of , abrasion resistance and solvent resistance will reduce and reduce, the number of printing products will be reduced, resulting in increased costs, wasted materials.
Fourth, a chemical reaction and the addition amount of the curing agent of colloidal silica proportion as follows: Take 100 g of silica gel, 50 g of silicone oil, followed by mixing with stirring until the silicone oil with the silica stir evenly, then 2% of the total weight of silica and silicone - 3% hardener is added, and then stirred for 2-3 minutes, it can be evacuated. Evacuation time is generally no more than 10 minutes, taking too long, colloidal quickly cured, it will affect the quality of inverted plastic.



Pad Silicone Product Features: 
 
With good elasticity, deformation, high temperature, and low shrinkage, mainly for the hand model design and development of small quantities of copy products.


Silicone printing parameters of conventional products

model	Exterior	Viscosity (cps)	Hardness (A)	Tensile strength (Mpa)	Tear Strength (KN / m)	Elongation(%)	Hardener added ratio (%)	Operation time (h)	Curing time (h)
912	Red, yellow, white and green	≤33000	28±2	≥3.5	≥24	≥420	2~3	0.5	2~4

916

Red, yellow, white

≤35000

15±2

≥3.5

≥24

≥420

2~3

0.5

2~4

902

Red, yellow, white and green

≤33000

28±2

≥3.2

≥20

≥380

2~3

0.5

2~4

918

Red, yellow, white

≤33000

28±2

≥3.6

≥26

≥420

2~3

0.5

2~4

Contact us if you need more details on Pad Mould. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Crystal Pad Mould、Pad Printing Mould. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Printing Machinery Parts